Fuel thermocouples

Fuel thermocouples for tube diameter 4, 6, 8, 10, 12 mm, Type K, Class 1 acc. IEC 584-3

Fuel thermocouples are being used increasingly to measure the temperatures of diesel and gasoline during vehicle operation on the bench or in the field. Especially at "common rail" fuel injection systems, the temperature is an important variable. The thermocouples should be mounted quickly and flexibly to all tube diameters can be.
The solution of Electronic sensor is possible for the tube inner diameter 4, 6, 8, 10, 12 mm. To measure temperatures up to 200 °C can, a hose connection in brass-trim selected. This was welded fuel-tight and hard-soldered to the thermocouple. The cable (length 3m) is isolatedas a shielded thermocouple type K cable and Teflon. The installation of a strain relief and a miniature thermocouple connector is possible.
Another solution may be chosen to 120 °C, the variant with the plastic connecting piece.

Order code
Temperature in °C
T-Hose
connection
Tube inner-Ø
Connection
Fuel-TE-MS 4 / 3m
- 50 up to 200 °C
Brass
4 mm
Fuel seal welded
and brazed
Fuel-TE-MS 6 / 3m
6 mm
Fuel-TE-MS 8 / 3m
8 mm
Fuel-TE-MS 10 / 3m
10 mm
Fuel-TE-MS 12 / 3m
12 mm
Order code
Temperature in °C
T-Hose
connection
Tube inner-Ø
 Connection
Fuel-TE-KS 4/3m
- 50 up to 120 °C
Plastic 4 mm
 
 
Fuel seal
stuck
 
 
Fuel-TE-KS 6/3m
6 mm
Fuel-TE-KS 8/3m
8 mm
Fuel-TE-KS 10/3m
10 mm
Fuel-TE-KS 12/3m
12 mm

 

Cooling water thermocouple, screw, 1/2", Type K, Class 1 acc. IEC 584-3

Cooling water thermocouple with cable, Type K, Class 1 to IEC 584-3 is designed for the temperature range from - 50 to + 200 °C. The thermocouple has a removable T-hose connection in brass (heavy duty) and for different tube inner diameter available on request. The thermocouple is welded and soldered watertight. The thermal conduction type K, class 1 is 3 meters with free connection ends.
An assembly with strain relief and thermal connector is available on request.

Order code
Temperature
in °C
T-Hose connection
Tube inner-Ø
Connection
Cooling-water-MTE/MS 20-12-20 /3m
      (screw design)
- 50 up to + 200 °C
M 20-12-20
brass 20 mm

   welded and
     soldered
    watertight